Kas yra vandens siurblys

Energy conservation and emission reduction have become the main content of China's economic development plan, especially for power, steel, non-ferrous metals, petrochemicals, vandens valymas and other industries with high energy consumption, more stringent emission reduction policies have been put forward. As the fluid conveying equipment in the industrial center, the vandens siurblys occupies the main part of energy consumption, and it has become the main problem to be solved in the energy saving operation.

The most common way to drive the vandens siurblys is to drive it with an electric motor. The energy saving method of the pump is mainly to make the pump unit (pump, prime mover and conversion part) run at the highest power, so that the electric energy consumed by the external input is reduced to the lowest point. The energy saving of the pump is a comprehensive technology, which involves the energy saving of the pump itself, the energy saving of the system and the operation of the application management.

Vandens siurbliai turi skirtingą paskirtį, skirtingą skysčių perdavimo terpę, skirtingus srautus ir skirtingus kėlimo diapazonus. Todėl, žinoma, jų struktūrinės formos ir medžiagos taip pat skiriasi. Apibendrinant, juos galima apytiksliai suskirstyti į: 1. Miesto vandentiekis 2 , nuotekų sistema 3, civilinė inžinerija, pastatų sistema 4, žemės ūkio vandens taupymo sistema 5, elektrinės sistema, 6, chemijos sistema 7, naftos pramonės sistema 8, kasybos ir metalurgijos sistema 9, lengvosios pramonės sistema 10, laivų sistema.

1. If the vandens siurblys has any small fault, remember not to let it work. If the packing of the vandens siurblys shaft is worn out, it should be added in time. If the vandens siurblys is continued to be used, air will leak.

2. If the vandens siurblys vibrates strongly during use, be sure to stop and check the cause, otherwise it will also cause damage to the pump.

3. The vandens siurblys must be maintained after use. For example, when the vandens siurblys is used up, the water in the vandens siurblys should be cleaned up. It is best to remove the water pipe and rinse it with clean water.

4. The tape on the vandens siurblys should also be removed, then rinsed with water and dried in the light. Do not put the tape in a dark and humid place. The tape of the vandens siurblys must not be stained with oil, let alone some sticky things on the tape.